VELCRO® Fabric Fusion Hook & Loop Iron On Tape White 20mm x 1 meter

Out of stock
£2.99
Sorry, this item is out of stock

Product information

20mm x 1m Iron On VELCRO Tape - White
A special fusion hook and loop tape, supplied with 1m (one metre) of hook and 1m (one metre) of loop, for longer lengths please adjust the quantity and we will send in a continuous strip up to 10 metres long. The backing reacts to heat and steam to effectivly weld itself to most fabrics, ideal for when sewing is not possible. please view the quick guide below for application.

Wash and dry fabric before applying Fabric Fusion fasteners. The heat-activated adhesive works on most heat tolerant fabrics, including cotton and blends, polyester, fleece, suede, canvas, denim, and nylon. For delicate fabrics, a press cloth is recommended.

1. With steam activated, heat steam iron to highest setting.
2. Remove VELCRO® Brand release liner from back of loop tape.
3. Position adhesive side on fabric.
4. Place fabric, fastener-side down, on pressing surface.
5. Press for 90 seconds, applying pressure and moving iron back and forth. Do not scorch the fabric. For delicate fabrics, a press cloth is recommended. Do not apply heat directly to loop tape.

Steam iron performances vary. Cool fabric completely and test bond by lifting edge. If the fastener has fused, the edge should be fixed. If the edge can be peeled back, apply heat again. After applying Fabric Fusion fasteners, wait at least 24 hours before laundering. After waiting 24 hours, the fabric can be machine washed or dry cleaned. Close fastener when cleaning.
 
Please note this has been cut from a larger roll , so no packaging or instructions will be included.

Technical specifications

Condition New